The Pro-Grade receiver responds to commands from up to 30 Lightning Transmitters. The receiver turns "ON" or "OFF" any light fixture or appliance that is plugged into it.
PROFESSIONAL-GRADE receivers have a special filter that, unlike other wireless systems, allows them to hear signals clearly through today's levels of RF (radio-frequency) noise.
10-Year Manufacturer's Limited Warranty.
LS-Receiver Toggle / Main (ON/OFF) 12V - 84W Wire-In 'Professional Grade" $60.97$56.99 On Sale!
Operates in range from 10VDC to 14VDC.
Maximum 84 Watts - 7 amps.
The RECEIVER receives commands from up to 30 batteryless Lightning Transmitters.
PROFESSIONAL GRADE means 33+% lomger range and greater resistance to high amounts of RF interference caused by nearby large transformers and other RF "noise makers".
Receiver Dimensions: 3.0"L x 2.25" W x 1.08" D. 10-Year Manufacturer's Limited Warranty
Receivers easily wire into the electrical system between the power supply and the fixture or device that you want to control.
For example: Install the receiver in the electrical junction box above your ceiling light. The Receiver "hears" signals from the Lightning Switch transmitter(s), then opens or closes power to the circuit.
Dimensions: 2.2" x 1.8" x 1.1" - fits in most standard junction boxes with room to spare.
screw onto the electrical box from which a mechanical light switch has been removed;
be afixed to the wall with hardware or double-stick tape (Both included)
Transmits a "Toggle" code which commands Receivers to "change state".
All Lightning Transmitters work without batteries because they generate their own electricity
This Transmitter emits a "Toggle" command. A Receiver will change state when it receives a "Toggle" command. If a Receiver is "ON" when it receives a "Toggle" code, it will turn "Off" - if it is "Off", it will turn "On".
The Large Frame Switch is designed to cover the hole in the wall that remains after a typical US wired switch has been removed.
Transmitter Dimensions: 5.14"L x 3.27"W x 0.54"D (approximately the same size as a standard North American light switch plate)
LS-Receiver Toggle / Main (ON/OFF) 12V - 84W Wire-In 'Professional Grade"
